English
OSD (On Screen Display) Controls
Information
When set to AUTO
Set automatically, as described below.
ABL: 100
ORBITER: AUTO1
INVERSE/WHITE: OFF
SCREEN WIPER: OFF
SOFT FOCUS: OFF
OSD ORBITER: ON
OSD CONTRAST: LOW
ABL (Auto Brightness Limiter)
Use this to activate the brightness limiter.
Example: Setting “ABL” to “75”
On “ABL” of “LONG LIFE” menu, select “75”.
LONG LIFE
ABL |
| : 75 |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : OFF | |
OSD ORBITER | : ON | |
OSD CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
ABL settings
100:The brightness of the screen is adjusted automatically to suit the picture quality.
75, 50, 25: Sets maximum brightness.
The brightness level decreases in the order of 75, 50, 25. 25 provides minimum brightness.
* These values are approximate.
ORBITER
Use this to set the picture shift.
Example: Setting “ORBITER” to “AUTO1”
On “ORBITER” of “LONG LIFE” menu, select “AUTO1”.
LONG LIFE
ABL |
| : 100 |
ORBITER |
| : AUTO1 |
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : OFF | |
OSD ORBITER | : ON | |
OSD CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
ORBITER settings
OFF: Orbiter mode does not function.
This is the default setting when PC signal is input. AUTO1: The picture moves around the screen intermittently, making the picture smaller. This is the default setting when a Video or a COMPONENT signal is input. Set to “OFF” when these signals are not used. AUTO2: The picture moves around the screen intermittently, making the picture bigger.
*When a Video or a COMPONENT signal is input, the AUTO1 and 2 functions will affect only the moving picture and will not make the screen smaller or bigger.
INVERSE/WHITE
Use this to set the inverse mode or to display a white screen.
Example: Setting “INVERSE/WHITE” to “WHITE”
On “INVERSE/WHITE” of “LONG LIFE” menu, select “WHITE”.
LONG LIFE
ABL |
| : 100 |
ORBITER |
| : OFF |
INVERSE/WHITE | : WHITE | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : OFF | |
OSD ORBITER | : ON | |
OSD CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
INVERSE/WHITE Settings
OFF: Inverse/white mode does not function.
INVERSE: The picture is displayed alternately between positive image and negative image.
WHITE: The entire screen turns white.
SCREEN WIPER
When this is set to ON, a white vertical bar moves repeatedly from the left and of the screen to the right end at a constant speed.
Example: Setting “SCREEN WIPER” to “ON”
On “SCREEN WIPER” of “LONG LIFE” menu, select “ON”.
LONG LIFE
ABL |
| : 100 |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : ON | |
SOFT FOCUS | : OFF | |
OSD ORBITER | : ON | |
OSD CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
SCREEN WIPER
ON: The white vertical bar appears.
OFF: Screen wiper mode does not function.
SOFT FOCUS
Reduces edges and softens the image.
Example: Setting “SOFT FOCUS” to “LEVEL2”
On “SOFT FOCUS” of “LONG LIFE” menu, select “LEVEL2”.
LONG LIFE
ABL |
| : 100 |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : LEVEL2 | |
OSD ORBITER | : ON | |
OSD CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
SOFT FOCUS settings
OFF: Turns the SOFT FOCUS function off.
LEVEL1, 2, 3, 4: Activates the SOFT FOCUS setting. The higher numbers create a softer image. “SHARPNESS” can not be adjusted on the “PICTURE” menu.
OSD ORBITER
Use this to set OSD menu shift.
Example: Setting “OSD ORBITER” to “OFF”
On “OSD ORBITER” of “LONG LIFE” menu, select “OFF”.
LONG LIFE
ABL |
| : 100 |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : OFF | |
OSD ORBITER | : OFF | |
OSD CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
OSD ORBITER settings
ON: The position of the menu will be shifted by eight dots each time OSD is displayed.
OFF: OSD will be displayed at the same position.
OSD CONTRAST
Use this to reduce the brightness of OSD menu.
Example: Setting “OSD CONTRAST” to “NORMAL”
On “OSD CONTRAST” of “LONG LIFE” menu, select “NORMAL”.
LONG LIFE
ABL |
| : 100 |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : OFF | |
OSD ORBITER | : ON | |
OSD CONTRAST | : NORMAL | |
SEL. | ADJ. | EXIT RETURN |
Information
OSD CONTRAST settings NORMAL: OSD brightness is set to normal. LOW: OSD brightness is set to lower.
Signal Information Menu
Checking the frequencies, polarities of input signals, and resolution
Use this function to check the frequencies and polarities of the signals currently being input from a computer, etc. On “MAIN MENU”, select “SIGNAL INFO.”, then press the MENU/SET button.
The “SIGNAL INFORMATION” is displayed.
SIGNAL INFORMATION
|
| H. FREQUENCY | : | 48 | .4kHz |
| |
|
| V. FREQUENCY | : | 60 | .0Hz |
| |
|
| H. POLARITY | : | NEGATIVE |
| ||
|
| V. POLARITY | : | NEGATIVE |
| ||
|
| MEMORY |
| : | 24 |
|
|
|
|
|
|
| |||
|
| RESOLUTION | : | 1024768 |
| ||
|
|
|
| EXIT RETURN |
| ||
|
| PC: | MEMORY will be displayed. | ||||
|
| ||||||
Others: MODE will be displayed.
English
OSD (On Screen Display) Controls
24
25
En | En |
