WIDE Operations
SCREEN SIZE Operation (manual) | The picture is expanded in the horizontal and vertical | |
With this function, you can select one of six screen sizes. | direction, maintaining the original proportions. | |
* Use this for theater size (wide) movies, etc. | ||
|
SCREEN SIZE Operation with Computer Signals
Information
Supported resolution
English
WIDE Operations
When viewing videos or digital video discs
1.Press the SCREEN SIZE button on the remote control.
2.Within 3 seconds ...
Press the SCREEN SIZE button again. The screen size switches as follows:
→ 4:3 → FULL → WIDE → ZOOM → 2.35:1 → 14:9
When a 720P or 1080I signal is input:
FULL ↔ 2.35:1
When displaying enhanced split screen:
4:3 ↔ FULL
4:3 size screen
The normal size screen is displayed.
*The picture has the same size as video pictures with a 4 : 3 aspect ratio.
FULL size screen
The image is expanded in the horizontal direction.
*Images compressed in the horizontal direction (“squeezed images”) are expanded in the horizontal direction and displayed on the entire screen with correct linearity. (Normal images are expanded in the horizontal direction.)
WIDE size screen
The picture is expanded in the horizontal and vertical directions at different ratios.
*Use this for watching normal video programs (4:3) with a wide screen.
ZOOM size screen
2.35:1 size screen
Original image 
Information is lost on both sides.
The squeezed film image is expanded to fulfill the entire screen at a ratio of 2.35:1. Black bands do not appear at the top and bottom but information is lost on the left and right margins.
• This feature is available when the input signal is video, component (480I, 480P, 720P, 1080I) or RGB (525P signal from a scan converter).
*If black bands appear on the top and bottom in the full size screen, select the 2.35:1 size screen to avoid phosphor burn- in.
14:9 size screen
The image is displayed at a 14:9 aspect ratio.
*This feature is available when the input signal is video, component (480I, 480P) or RGB (525P signal from a scan converter).
Note:
Do not allow the displayed in 4:3 mode for an extended period. This can cause a phosphor
Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen.
1.Press the SCREEN SIZE button on the remote control.
2.Within 3 seconds ...
Press the SCREEN SIZE button again. The screen size switches as follows:
→ 4:3 → FULL → ZOOM
When displaying enhanced split screen:
4:3 ↔ FULL
4:3 size screen (4:3 or SXGA 5:4)
The picture has the same size as the normal computer image.
FULL size screen
The image is expanded in the horizontal direction.
ZOOM size screen
When wide signals are input.
FULL size screen
See page 27 for details on the display output of the various VESA signal standards supported by the monitor.
“D BY D” , a way of displaying pixels in a
When 852 (848) dot 480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are in- put
Select an appropriate setting for RGB SELECT mode referring to the“Table of Signals Supported” on page 27.
*“VGA”, “SVGA” and “SXGA” are registered trademarks of IBM, Inc. of the United States.
Note:
Do not allow the displayed in 4:3 mode for an extended period. This can cause a phosphor
English
WIDE Operations
8 | 9 |
En | En |
