Connection Diagram

This diagram shows connections using external output. Slide the input switch to the left.

In the case of connecting the external output from a car stereo to an RCA input, use the jack used for full- range output. This is because the LPF of the amplifier cannot be turned OFF. If this jack cannot be used, connect the subwoofer output jack to the RCA input.

When you connect with speaker output, connections defers from the diagram. For details, see the “Using the Speaker Input” section. In either case, you need to set the input switch. For details, see the “Setting the Unit” section.

Always use the special red battery and ground wire ([RD-223] and [RD-222]), which are sold separately. Connect the battery wire directly to the car battery positive terminal (+) and the ground wire to the car body. There is the risk of a fuse burning out if only one of these is connected.

Grommet

Special red battery wire

After making all other connections at the amplifier,

 

 

connect the battery wire terminal of the amplifier to

 

the positive (+) terminal of the battery.

Fuse (30 A) 3

Ground wire (black)

[RD-223]

Connect to metal body or chassis.

 

External Output

(sold separately)

[RD-222] (sold separately)

 

Bass Boost

 

Car stereo with

Remote Control

Bass Boost Remote

RCA output jacks

 

Control Wire

 

6 m (19 feet 8 inch)

 

Jack for the bass boost

 

remote control

Connecting wire with RCA

Connect this jack and

pin plugs (sold separately).

the bass boost remote

 

control with the bass

 

boost remote control

 

wire.

RCA input jack

 

 

Fuse (40 A)

Speaker output terminal

SYNC OUTPUT/SYNC INPUT jack

See the “Connecting the Speaker Wires”

 

See the “Connecting the

 

 

Speaker Wires” section for

section for SYNC OUTPUT/SYNC

INPUT jack connection instructions.

speaker connection instruc-

 

tions.

 

System remote control wire (sold separately)

Connect the male terminal of this wire to the system remote control terminal of the car stereo (SYSTEM REMOTE CONTROL). The female terminal can be connected to the auto-antenna relay control terminal. If the car stereo does not have a system remote control terminal, connect the male terminal to the power terminal through the ignition switch.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS êìëëäàâ

6

Page 7
Image 7
Pioneer PRS-D1000M owner manual Connection Diagram

PRS-D1000M specifications

The Pioneer PRS-D1000M is a versatile and powerful car amplifier designed to enhance the audio experience in vehicles. Known for its robust performance and innovative features, this amplifier is ideal for enthusiasts seeking to elevate their sound system.

One of the main features of the PRS-D1000M is its impressive power output. It delivers up to 1000 watts of maximum power, allowing users to drive high-performance subwoofers and achieve deep, thunderous bass. With its RMS power rating of 500 watts at 2 ohms, this amplifier ensures that even the most demanding audio setups can be accommodated, making it suitable for both daily driving and competition use.

The PRS-D1000M employs Class D technology, which is crucial for efficiency and heat management. Class D amplifiers convert a higher percentage of the power drawn from the vehicle's electrical system into usable output, resulting in less heat generation and lower energy consumption. This is particularly beneficial for car audio systems, where space and power are often at a premium.

Another notable characteristic is the built-in low-pass filter, which allows users to tailor the sound by eliminating higher frequencies that can muddy the bass response. The variable frequency adjustment lets users set the cutoff point according to their specific subwoofer and listening preferences, resulting in a more refined audio experience.

The Pioneer PRS-D1000M also features a bass boost function, which lets users increase low-frequency output for a more pronounced bass response. This is especially useful for those who love bass-heavy music genres. The amplifier's compact design makes it easy to install in various locations within the vehicle, ensuring that it doesn't compromise valuable space.

Furthermore, the amplifier is equipped with RCA inputs for seamless integration with other audio components. It includes speaker-level inputs, allowing it to connect to factory audio systems without needing to replace the head unit.

In conclusion, the Pioneer PRS-D1000M is engineered for performance, efficiency, and flexibility. With its powerful output, advanced technologies, and user-friendly features, it is an excellent choice for anyone looking to upgrade their car's audio system and enjoy a superior listening experience on the road.