Pioneer RS-232C manual Error Messages, Initial Setting, Register/Switch, Setting at Power ON

DVD-V5000 DVD Player

RS-232 Command Protocol

3.4Error Messages

If an error occurs during a command execution, the player returns an error code. The table below lists each code with a description of the error:

Code	Message	Description
E00	Communication error	Communication Line Error due to framing error
		or buffer overflow
E04	Feature not available	Non-Usable Function has been tried – either
		the command mnemonic is wrong or the
		command can not be used in this mode
E06	Missing argument	Correct parameter is not specified
E11	Disc does not exist	There is no disc in the tray
E12	Search error	Search address is missing
E15	Picture stop	Playback has been stopped by VOBU Still while
		in the Auto Play mode
E16	Interrupt by other device	The command(s) sent via the serial line were
		not executed before commands were sent from
		the front panel buttons and/or remote control
E99	Panic	Unrecoverable Error occurred – possible that a
		disc cannot be loaded and/or playing does not
		continue

3.5Initial Setting

The following table provides the default internal register and switch settings. Take care when setting the required parameters for an application program.

Register/Switch	Setting at Power ON
Video Switch	1	: ON
Audio Switch	3	: Audio 1
Display Switch	0	: OFF
Address mode	1	: Time
Speed Parameter	15	: 1/4 Speed
CCR	3	: Mode 3
Register A	3	: Title/Chapter and Frame
		Display (DVD)
		Track/Time Display (CD, VCD)
Register D	0	: CR

- 8