Pioneer RS-232C manual Register D Set, Print Character, Only Frame number is displayed

DVD-V5000 DVD Player

RS-232 Command Protocol

The user’s area has lines numbered from 0 to 9 with a total of 10 lines available. If line 0 is designated to show system information, all following lines are hidden.

The player allows/displays up to 320 characters (32 characters per line with

10 lines available). Follow the instructions below to create a User’s Display:

1.Select User's Display in Register A

2.Set the display data using a print character command

3.Turn display switch ON

Execution :
	String	Status Return	DVD player
	1DS<CR>	R<CR>	Display Off to Display On
	1RA<CR>	R<CR>	Only Frame number is displayed

6.14Register D Set

Function	:	current setting of Register D is rewritten
Format	:	Integer RD

Explanation : Register D contains the termination setting of the serial communication (RS232). There are two choices, “CR” or “CR + LF”. The default for Register D is 0.

Argument	Function
0 (default)	CR

64CR + LF

6.15Print Character

Function	: Characters are written into the User's Display Area
	(Not to be issued simultaneously with other commands)
Format	: Integer PR <CR>

Character string <CR>

Explanation : The command writes a character string for one line into the User Display Area (turn ON the User Display Specification in Register A).

Follow the instructions listed below to create printed characters.

1. Specify the line number using an integer in the range 0 ~ 9

- 47