Pioneer RS-232C manual Multi-Speed Forward or Reverse DVD

DVD-V5000 DVD Player

RS-232 Command Protocol

scanning is finished, the player resumes the Random Access mode and returns the completed status message.

If the SCAN command is sent while the player is in Fast Forward or Reverse Playback, the player enters Scan mode.

Once the NS command is sent, the player resets to the normal Playback mode and returns the completed status message.

Execution :
	String	Status Return	DVD player
	NF<CR> or NR<CR>	R<CR>	Play mode to Scan mode
	NS<CR>	R<CR>	Return to Play mode

5.10Multi-Speed Forward or Reverse (DVD)

Function	: Playback occurs at the speed specified in the Speed Register
	(Option - Auto Stop)
Format	: (Address)MF	(Multi-Speed Forward)
	(Address)MR	(Multi-Speed Reverse)	(Address > 0)

Explanation : If the player is in Random Access mode when the command is executed, the player enters Multi-Speed mode and returns the completed status message immediately.

While in Multi-Speed mode, pictures are reproduced at the speed specified by the Speed Register. No audio tracks are played during Multi-Speed playback.

NOTE: These speeds are approximate values only.

If an address is specified, an Auto Stop occurs on the selected sequence. The specified address is written as a Mark Frame or Mark Time and is compared with the current address. If the current address matches the specified address, the player enters Pause or Still mode and returns the completed status message. This command functions in a similar manner as the Stop Marker command.

If another command is issued before the player reaches the specified Address, the Auto Stop command is canceled and the player enters normal Multi-Speed mode. However, if the disc program does not allow a pause, the player ignores the command.

- 19