Pioneer S-DV1SW Listening to other sources, Reducing AM reception noise, Memorizing stations

Getting started

Select FM AUTO above to switch back to auto- stereo mode (the stereo indicator ( ) lights when receiving a stereo broadcast).

Reducing AM reception noise

If AM reception seems particularly poor, or the AM radio station you’re listening to seems noisy, try using the Noise Cut feature for better sound quality.

1Tune to an AM radio station then press

SHIFT+SETUP.

2	Use	to choose NOISECUT then press
ENTER.
3	Use	to select the noise cut mode then

press ENTER.

Select an effect level between 1 and 3.

Memorizing stations

You can save up to 30 station presets so that you always have easy access to your favorite stations without having to tune in manually each time.

1Tune to an AM or FM radio station. Select mono or auto-stereo reception (FM) or the Noise Cut mode (AM) as necessary. These settings are saved along with the preset.

2	Press SHIFT+SETUP and use		to
choose ‘ST.MEM.’ then press ENTER.
3	Use	to select the station preset you
want then press ENTER.

Listening to other sources

You can connect auxiliary sources (TV, satellite receiver, etc.) to this unit for playback through the speaker system. See Connecting auxiliary audio components on page 31 for more on this.

•To connect a USB device to the USB terminal, see USB playback on page 23.

1Make sure that the external source (TV, satellite receiver, etc.) is switched on.

2Press LINE to select the source.

3If necessary, start playback of the source.

02

English Deutsch Français Italiano Nederlands Español

Listening to station presets

1Make sure the TUNER function is selected.

2Use the ST +/– buttons to select a station preset.

•You can also use the number buttons to do this.

13

En