Pioneer T502202 manual Chapter Point, Wait, Finalize

PRV-LX1Guide

EDL Commands

3.3Chapter Point

Entry	Operation	Parameter
###	CHP	Chapter Point (Chapter points are in SMPTE time code)

Each chapter point operation entry needs to come right after the Title Record entry (In/ OUT Point Rec) in the order of occurrence. A Chapter Point must have the same Entry Number as the In/Out Point Rec.

3.4	Wait
	Entry	Operation	Parameter
	###	WAI

Wait is useful when the source tape requires exchanging. When executed, a window prompts the user to change source tapes. When the exchange has been completed the user presses Enter to continue execution of the EDL.

3.5Finalize

Entry	Operation	Parameter
###	FNL

This command can only used as the last entry in an EDL. It will be ignored if the PRV-LX1 target is set for HDD. There are no parameters for the finalization command.

Page 5 of 6