114
2Performing Adjustments
1) Entering and exiting the adjustment mode
Turn on the power switch and press the two
ADJ IN
keys of the remote control together. The adjustment mode will be set.
To exit this mode, press the
ADJ OUT
key of the remote control. The normal screen will return.
2) Using the adjustment mode
The following main menu will be displayed when the adjustment mode is entered.
• Main Menu
1) ID SET/CLEAR/SELECT mode
Used for selecting, setting and clearing the ID.
2) OPERATION mode
Switches the setting such as input selection, ABL linkage ON/OFF, etc.
3) DEFLECTION ADJ mode
Adjusts the main deflection size, etc. (But all three colors RGB at once except GH LINEARITY.)
4) CONVERGENCE ADJ mode
Adjusts the convergence. (R, G, and B can be adjusted individually.)
5) POINT CONVER ADJ mode
Adjusts the convergence by point and zone convergence. (R,G,and B can be adjusted individually.)
6) WHITE BALANCE ADJ mode
Adjusts the white balance, color.
7) MEMORY READ/COPY mode
Adjusts the current value (both convergence and white balance) to the value set at shipment, and copy the convergence
data between the memories.
ADJUST
1.ID SET/CLEAR/SELECT
2.OPERATION MODE
3.DEFLECTION ADJ
4.CONVERGENCE ADJ
5.POINT CONVER ADJ
6.WHITE BALANCE ADJ
7.MEMORY READ/COPY
ADJUSTMENTS