71
ADJUSTMENTS
The & numbers correspond to the numbers in the flow-
chart.
2Adjustment signal input
For adjusting size...Frame size picture(EX.LD Test disc GGT1072, FRAME No. 5941),Monoscope, etc.
For screen joining, linearity, color adjustment...Use adjustment signals such as , cross-hatch, etc.
(EX. LD Test disc GGT1072, FRAME No. 7081,etc.)
If signals are created in the multi video processor, use them.
Input the above adjustment signals via the Multi Video Processor actually used.
Note : For the particulars about the FRAME No.,etc. of LD Test disc GGT1072,refer to the disc manual differently.
(3) Convergence Adjustment Contents
1Measurement of screen center
The center can be found easily by pasting threads in the
spaces of the protection panels at the screen frame.
3 Center adjustment
Set to only green and adjust the center with V STATIC
GH STATIC.
Center
V STATIC
GH STATIC