72
ADJUSTMENTS
Observe here
Observe
here
Reference Information
To adjust the NTSC input for horizontal 93% and vertical 92%, use the frame size screen of the LD test disc GGT1072
(frame No. 5941).
Horizontal : Adjust so that the sixth 92.5% line from the inside can be seen completely.
Vertical : Adjust so that the sixth 92.5% line from the inside can be seen only slightly.
3 V SIZE, V LINEARITY, H SIZE, GH LINEARITY adjustment
Those familiar with the convergence adjustment can adjust the bottom part of the screen in addition to the top part of the screen
using V SIZE and V LINEARITY . Also it can adjust the left side of the screen in addition to the right side of the screen using
HSIZE and GH LINEARITY .
4 V SIZE, V LIN, H SIZE Adjustment
1V SIZE adjustment
Set to only green, observe the top part of the screen , and
adjust the data amount in the vertical direction using
V SIZE .
Do not observe the bottom part of the screen.
2 H SIZE adjustment
Set to only green, observe the right side of the screen ,
and adjust the data amount in the horizontal direction us-
ing H SIZE .
Do not observe the left side of the screen.