132
CHECK SHEET
<CUBE Adjustment>1. Preparations
1Connect the power supply, and connect the cable for input signals and ABL link cable (control cable).
2Place the connected cables neatly.
3After completing the above 1 and 2, turn on the power and perform aging for one hour.
4Prepare the signals required for adjustments.
2. Before Starting Adjustments (Set Conditions)........................................................................... P. 62
1Set whether to perform the adjustments using the remote control or personal computer.
2Check the TV SYSTEM setting.
Check the convergence memory and white balance memory used for the adjustments.
3Check and set the STATUS.
MULTI ON/OFF, COMBINATION ON/OFF, ABL link switch settings (3-levels).
4Recording the settings in the memory.
3. Setting ID........................................................................................................................................ P. 65
1Set the ID to each CUBE.
4. Adjusting The Screen
1Adjust the size of each screen. ....................................................................................................................................... P. 71
2Adjust the convergence of each screen......................................................................................................................... P. 72
3Adjust the link of each screen......................................................................................................................................... P. 73
4Adjust the W/B of each screen........................................................................................................................................ P. 88
5Adjust the ABL level. .......................................................................................................................................................P. 92
6Adjust the color using the image to be transmitted...................................................................................................... P. 93
7Check the whole screen.