dSelectthe line ’AUTO STANDBY’ with the menu buttons
P=or P;.
eSelect’ON’ with the menu buttons Qor P.If you se-
lect’OFF’, the function will be switched off.
fConfirmwith the OK button.
gToend, press the MENU button.
DATIMERrecording only functions when the video
recorderis switched to standby.
The ’DEMO’ function
Whenthe ’DEMO’ function is switched on and the video
recorderswitched off, several menus will be demonstrated on
theTV screen. This has no influence on operating the video
recorder.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button.The main menu appears.
cSelectthe line ’SPECIAL SETTINGS’ with the menu
buttons P=or P;andconfirm with the Pbutton.
dInthe line ’DEMO’, select ’ON’ with the menu buttons
Por Q.
Ifyou select ’OFF’ the function will be switched off.
eConfirmwith the OK button.
fToend, press the MENU button.
DThe’DEMO’ function is not possible during a ’TIMER
recording’and during an ’Automatic recording from a
satellitereceiver’.
Poor TV reception - Optimize the modulator
With’Connecting without scart cable’, UHF-channel CH35or
583MHzmight already be being used by another TV station in
yourreception area. In this case the picture quality on your TV
setwill be adversely affected when receiving one or more TV
channels.
aEnsurethat no cassette has been loaded. On the video
recorder,simultaneously hold the STOP/EJECT ?and
the PLAYGbutton for a few seconds until e.g.: ’CH35’
or’583’ appears in the display. The video recorder
transmitsa test picture on this UHF-channel (or this
frequency).
INSTALLATION
OPTIMIZEMODULATOR
}OPTIMIZE |CH35 }
{MODULATOR ON
CHANNEL/FREQ. CH
________________________________
TOEXIT
PRESS MENU
bInline ’CHANNEL/FREQ.’ select the indication for channel
’CH’or frequency ’FREQ.’, using the menu buttons Por
Q.
cSelectthe line ’OPTIMIZE’ with the menu buttons P;or
P=.Press the menu button P.
dWhenthe video recorder finds a ’free’ TV channel, the
channelor frequency will be indicated.
DYoucan also enter the channel or frequency directly with
thedigit buttons 0-9 .
eTunein the TV set in this channel or frequency.
fConfirmthe channel or frequency indicated with the
OK button.
gToend, press the MENU button.
Switching off the modulator
Ifyou cannot eliminate picture or sound interference, you can
switchoff the built-in modulator. You should only do this if you
haveconnected the video recorder to the TV set with a scart
cable.’Connecting VCR without scart cable’ is not possible
whenthe modulator is switched off.
17