04Getting started
FAQ
•After I load a DVD disc, it ejects automatically after a few seconds!
Most likely, the disc is the wrong region for your player. The region number should be printed on the disc; check it against the region number of the player (which you can find on the rear panel). See also
If the region number is OK, it may be that the disc is damaged or dirty. Clean the disc and look for signs of damage. See also Taking care of your player and discs on page 43.
•Why won’t the disc I loaded play?
First check that you loaded the disc the right way up (label side up), and that it’s clean and undamaged. See Taking care of your player and discs on page 43 for information on cleaning discs.
If a disc loaded correctly won’t play, it’s probably an incompatible format or disc type, such as
•I have a widescreen TV so why are there black bars at the top and bottom of the screen when I play some discs?
Some movie formats are such that even when played on a widescreen TV, black bars are necessary at the top and bottom of the screen. This is not a malfunction.
•I have a standard (4:3) TV and set the player to show widescreen DVDs in pan & scan format, so why do I still get black bars top and bottom with some discs?
Some discs override the display preferences of the player, so even if you have 4:3 (Pan & Scan) selected, those discs will still be shown in letter box format. This is not a malfunction.
22
•My AV receiver is definitely compatible with 96/88.2kHz Linear PCM audio, but it doesn’t seem to work with this player. What’s wrong?
For digital
To fully take advantage of the high sampling rate audio, connect the analog audio outputs to your amplifier/receiver.
•Why can’t I hear SACD audio through the digital outputs?
SACD audio is only available through the analog outputs. This is not a malfunction. Some
•Is it better to listen to
Some
Using the multichannel analog audio outputs for
•My DVD-Audio disc starts playing, but then suddenly stops!
The disc may have been illegally copied.
En
