Pioneer VSX-01THX operating instructions Controls and displays Chapter, Front panel, 12 13

Controls and displays 04

Chapter 4:

Controls and displays

Front panel

1 2 3 4

5

VSX-01TXH

STANDBY/ON

INPUT

SELECTOR

	PHASE		ADVANCED		DIGITAL PRECISION		DIGITAL VIDEO
	CONTROL		MCACC		PROCESSING			SCALER	HDMI
DVD	BD	TV SAT	DVR 1/DVR 2	VIDEO	HDMI 1/HDMI 2	CD/CD-R	FM/AM	XM/SIRIUS	iPod USB	MULTI CH IN

	AUTO SURR/	HOME	STANDARD	ADVANCED	STEREO/
	STREAM DIRECT	THX	SURROUND	SURROUND	A.L.C.	VIDEO INPUT		iPod DIRECT	MCACC
					VIDEO	L AUDIO R	DIGITAL IN	USB	SETUP MIC
PHONES	MULTI-ZONE
				ST –	ST +
	CONTROL	ON/OFF	SPEAKERS

MASTER VOLUME

10			11		6	7	8	9
	AUTO SURR/	HOME	STANDARD	ADVANCED	STEREO/
	STREAM DIRECT	THX	SURROUND	SURROUND	A.L.C.
PHONES	MULTI-ZONE			ST –	ST +
	CONTROL	ON/OFF	SPEAKERS

12 13 14

1INPUT SELECTOR dial Use to select an input source.

2 STANDBY/ON

Switches the receiver between on and standby. Power indicator lights when the receiver is on.

3 Remote sensor

Receives the signals from the remote control (see Operating range of remote control unit on page 26).

4PHASE CONTROL indicator – Lights when the Phase Control is switched on (page 12).

ADVANCED MCACC indicator – Lights when one of the MCACC presets (page 33) is selected.1

DIGITAL PRECISION PROCESSING indicator – Lights to indicate digital processing (for example, it disappears when Pure Direct (page 33) is on, or when listening through the multichannel analog inputs).

DIGITAL VIDEO SCALER indicator – Lights when Resolution is set to a setting other than PURE (for example, when the video input signal is upscaled) (page 73).

HDMI indicator – Blinks when connecting an HDMI- equipped component; lights when the component is connected (page 67).

5MASTER VOLUME dial

6Input source buttons Press to select an input source.

7VIDEO INPUT

See Connecting a component to the front panel inputs on page 20.

8 iPod DIRECT USB terminal

Use to connect your Apple iPod as an audio source (page 52), or connect a USB audio device for playback (page 54).

9 MCACC SETUP MIC jack

Use to connect the supplied microphone.

Note

1The MCACC indicator does not light when the MCACC preset memory currently being selected has not been corrected with Acoustic Calibration EQ Professional or when EQ is set to OFF in the Audio parameter menu (see Setting the Audio options on page 73).

25

En