Pioneer VSX-01THX Using the tuner, Naming station presets, Listening to station presets

Using the tuner 06

4 Press ENTER.

After pressing ENTER, the preset class and number stop blinking and the receiver stores the station.

Naming station presets

For easier identification, you can name your station presets.

1 Choose the station preset you want to name.

See Listening to station presets below for how to do this.

2 Press T.EDIT (Tuner Edit).

The display shows STATION NAME, then a blinking cursor at the first character position.

3 Input the name you want.

Choose from the following characters for a name up to four characters long.

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz

0123456789

!”#$%&’()∗+,–./:;<=>?@[ \ ]^_{} ˜ [space]

Use / to select a character, / to set the position, and ENTER to confirm your selection.

Tip

•To erase a station name, simply repeat steps 1 to 3 and input four spaces instead of a name.

•Once you have named a station preset, you can press DISPLAY when listening to a station to switch the display between name and frequency.

Listening to station presets

You will need to have some presets stored to do this. See Saving station presets on page 36 if you haven’t done this already.

1Press FM/AM to select the tuner.

2Press CLASS to select the class in which the station is stored.

Press repeatedly to cycle through classes A, B and C.

3Press ST / to select the station preset you want.

•You can also use the number buttons on the remote control to recall the station preset.

37

En