13Additional information

Chapter 13:

Additional information

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized independent service company to carry out repair work.

Power

Symptom

Remedy

The power does not turn on.

• Make sure that the power cable is plugged in to an active power outlet.

 

• Try disconnecting from the power outlet, then plugging back in.

 

 

The receiver suddenly switches

• Check that there are no loose strands of speaker wire touching the rear panel or another set of

off or the PHASE CONTROL

wires. If so, re-attach the speaker wires, making sure there are no stray strands.

indicator blinks.

• The receiver may have a serious problem. Disconnect from the power and call a Pioneer authorized

 

independent service company.

 

 

During loud playback the

• Turn down the volume.

power suddenly switches off.

• Lower the 63 Hz and 125 Hz equalizer levels in the Manual MCACC setup on page 41.

 

• Try switching on the digital safety feature (put the receiver into standby, hold down the

 

ADVANCED/SURROUND button on the front panel and press  STANDBY/ON to switch between

 

SAFETY 1 ON (medium effect), SAFETY 2 ON (more effect) and SAFETY OFF). If the power switches

 

off even with SAFETY 2 ON, turn down the volume. With SAFETY 1 ON or SAFETY 2 ON on, some

 

features may be unavailable.

 

 

The unit does not respond

• Try switching the receiver off, then back on again.

when the buttons are pressed.

• Try disconnecting the power cable, then connect again.

 

 

AMP ERR blinks in the display,

• The receiver may have a serious problem. Do not try switching the receiver on. Contact a Pioneer

then the power automatically

authorized independent service company for help.

switches off. The MCACC

 

blinks and the power does not

 

turn on.

 

 

 

AMP OVERHEAT blinks in the

• Allow the unit to cool down in a well-ventilated place before switching back on. Check the safety

display, then the power

precautions on page 2 for information on improving heat dispersal.

automatically switches off.

 

 

 

The receiver suddenly switches

• The receiver may have a serious problem. Do not try switching the receiver on. Contact a Pioneer

off or DIGITAL PRECISION

authorized independent service company for help.

PROCESSING indicator blinks.

 

 

 

No sound

Symptom

No sound is output when an input source is selected.

No sound output from the front speakers.

Remedy

•Check the volume, mute setting (press MUTE) and speaker setting (press SPEAKERS).

•Make sure the correct input source is selected.

•Check that the MCACC setup microphone is disconnected.

•Make sure the correct input signal is selected (press SIGNAL SEL). Note that when PCM is selected, you won’t be able to hear any other signal format.

•Check that the source component is connected properly (see Connecting your equipment on page 13).

•Check that the speakers are connected properly (see Connecting the speakers on page 21).

80

En

Page 79 Page 81
Page 80
Image 80
Pioneer VSX-1018AH-K manual Additional information Chapter, Troubleshooting, Power, No sound
Page 79 Page 81

VSX-1018AH-K specifications

The Pioneer VSX-1018AH-K is a powerful home theater receiver that embodies a blend of quality, features, and innovative technology, making it a standout choice for audio enthusiasts and casual listeners alike. This 7.1-channel receiver boasts a robust output of 110 watts per channel, designed to deliver immersive audio across various environments.

One of the key features of the VSX-1018AH-K is its support for advanced audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats provide a lossless soundtrack experience, ensuring that audio reproduction remains faithful to the original source. This receiver is also equipped with Pioneer’s proprietary MCACC (Multi-Channel Acoustic Calibration System), which allows users to optimize sound settings based on their specific room acoustics. By analyzing and adjusting the sound fields, MCACC ensures that every listener enjoys an enhanced audio experience.

In terms of connectivity, the VSX-1018AH-K excels with its array of inputs and outputs. It includes multiple HDMI inputs, allowing users to seamlessly connect various devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it supports HDMI version 1.3, which means it can handle high-definition video signals and deep color technology, enhancing the overall viewing experience.

For those who appreciate versatility, this receiver also features built-in support for both wireless and wired network audio streaming. Users can connect to their home network to enjoy music stored on their devices or access popular streaming services. The USB port allows for easy connection of flash drives, enabling playback of high-resolution audio files.

Moreover, the receiver is equipped with a user-friendly interface and an intuitive remote control, making it easy to navigate through various settings and options. The graphical user interface is designed for simplicity, enabling users to customize preferences without hassle.

The Pioneer VSX-1018AH-K not only focuses on sound but also on video quality, thanks to its upscale capabilities that can convert standard-definition video to high-definition, ensuring that all media looks great on HD displays. Overall, the Pioneer VSX-1018AH-K represents a comprehensive solution for anyone looking to enhance their home theater system, merging advanced technology with user-friendly features aimed at delivering an unparalleled home entertainment experience.
Top Page Image Contents