Chapter

8 Control with HDMI function

Synchronized operations below with a Control with HDMI- compatible Pioneer TV or Blu-ray Disc player are possible when the component is connected to the receiver using an HDMI cable.

•Synchronized amp mode

The receiver’s volume can be set and the sound can be muted using the TV’s remote control.

•Power synchronization with TV

•Automatic switching of inputs

The receiver’s input switches over automatically when the TV’s input is changed or a Control with HDMI-compatible component is played.

Important

•With Pioneer devices, the Control with HDMI functions are referred to as “KURO LINK”.

•You cannot use this function with components that do not support Control with HDMI.

•We only guarantee this receiver will work with Pioneer made Control with HDMI-compatible components. However, we do not guarantee that all synchronized operations will work with components that support the Control with HDMI function.

•Use a High Speed HDMI® cable when you want to use the Control with HDMI function. The Control with HDMI function may not work properly if a different type of HDMI cable is used.

•For details about concrete operations, settings, etc., refer to also the operating instructions for each component.

Making Control with HDMI connections

You can use synchronized operation for a connected TV and other components.

•Be sure to connect the TV’s audio cable to the audio input of this unit. When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI Audio Return Channel function, the sound of the TV is input to the receiver via the HDMI terminal, so there is no need to connect an audio cable. In this case, set ARC at HDMI Setup to ON (see HDMI Setup below).

For details, see Connecting using HDMI on page 17.

Important

•When connecting this system or changing connections, be sure to switch the power off and disconnect the power cord from the wall socket.

After completing all connections, connect the power cords to the wall socket.

•After this receiver is connected to an AC outlet, a 2 second to 10 second HDMI initialization process begins. You cannot carry out any operations during initialization. The HDMI indicator on the display unit blinks during initialization, and you can turn this receiver on once it has stopped blinking.

•To get the most out of this function, we recommend that you connect your HDMI component not to a TV but rather directly to the HDMI terminal on this receiver.

HDMI Setup

You must adjust the settings of this receiver as well as the connected Control with HDMI-compatible components in order to make use of the Control with HDMI function. For more information see the operating instructions for each component.

1 Switch on the receiver and your TV.

Press RECEIVER to switch on.

2 Switch the TV input to the input that connects this receiver to the TV through the corresponding HDMI cable.

3 Press RECEIVER , then press HOME MENU.

The Home Menu appears on your TV. Use ///and ENTER on the remote control to navigate through the screens and select menu items. Press RETURN to exit the current menu.

•Press HOME MENU at any time to exit the Home Menu.

4 Select ‘HDMI Setup’ from the Home Menu.

Home Menu

 

6 . HDMI Setup

 

 

 

1

. Auto

MCACC

Control

[

ON

]

2

. Manual SP Setup

ARC

OFF

3

. Input

Assign

Standby Through

[

---

]

4

. Speaker

System

 

 

 

 

5

. Video

Parameter

 

 

 

 

6

. HDMI

Setup

 

 

 

 

7

. Auto

Power Down

 

 

 

 

8

. Network

Standby

 

 

 

 

9

. FL Demo

Mode

 

 

 

 

Return

VSX-1022

5 Select the ‘Control’ setting you want.

Choose whether to set this unit’s Control with HDMI function ON or OFF. You will need to set it to ON to use the Control with HDMI function.

When using a component that does not support the Control with HDMI function, set this to OFF.

•ON – Enables the Control with HDMI function. When this unit’s power is turned off and you have a supported source begin playback while using the Control with HDMI function, the audio and video outputs from the HDMI connection are output from the TV.

•OFF – The Control with HDMI is disabled. Synchronized operations cannot be used. When this unit’s power is turned off, audio and video of sources connected via HDMI are not output.

6 Select the ‘ARC’ setting you want.

When a TV supporting the HDMI Audio Return Channel function is connected to the receiver, the sound of the TV can be input via the HDMI terminal.

•ON – The TV’s sound is input via the HDMI terminal. This can only be selected when Control is set to ON.

•OFF – The TV’s sound is input from the audio input terminals other than HDMI inputs.

7 Choose the ‘Standby Through’ setting you want.

When the receiver is in standby, the HDMI input signal selected here will be output to the TV by HDMI.

•LAST – The HDMI input signal selected previously will be output. This can only be selected when Control is set to OFF.

52