Control with HDMI function | 07 |
•OFF – The Control with HDMI is disabled.
Synchronized operations cannot be used. When this unit’s power is turned off, audio and video of sources connected via HDMI are not output.
6Select the ‘Control Mode’ setting you want.
Choose whether you want to enable HDMI for all linked functions or the PQLS function only. However, Display Power Off will activate the settings set forth in step 7 below.
•ALL – Enabled for all linked functions.
•PQLS – Enabled only for the PQLS function. When PQLS is selected, link functions other than the PQLS function may not work properly. If you wish to use all link functions, select ALL.
7Select the ‘Display Power Off’ setting you want.
If the TV’s power is turned off while using the Control with HDMI function, the receiver’s power is also turned off (all power off function). This function can be disabled.
•YES – The all power off function is enabled. The receiver’s power turns off together with the TV’s power.
This function only works when the input for a component connected to the receiver by HDMI connection is selected or when watching the TV.
•NO – The all power off function is disabled. The
receiver’s power is not affected when the TV’s power is turned off.
8 Select the ‘Standby Through’ setting you want.
It is possible to transfer signals from an
•Normal – Regular setting.
•Eco – Conserves energy while standby.
9 Select the ‘TV Audio’ setting you want.
When a TV supporting the HDMI Audio Return Channel function is connected to the receiver, the sound of the TV can be input via the HDMI terminal.
•Normal – The TV’s sound is input from the Audio input terminals other than HDMI inputs.
•via HDMI – The TV’s sound is input via the HDMI terminal. This can only be selected when Control is set to ON.
10
The component connected to the 12V TRIGGER jack can be turned on and off when HDMI OUT is switched. HDMI OUT 1, HDMI OUT 2 or OFF can be selected. Select OFF when you want the component to switch when the input function is switched.
11 When you’re finished, press HOME MENU.
Before using synchronization
Once you have finished all connections and settings, you must:
1Put all components into standby mode.
2Turn the power on for all components, with the power for the TV being turned on last.
3Choose the HDMI input to which the TV is connected to this receiver, and see if video output from connected components displays properly on the screen or not.
4Check whether the components connected to all HDMI inputs are properly displayed.
About synchronized operations
The Control with
•From the menu screen of the Control with HDMI- compatible TV, set audio to be played through this receiver, and the receiver will switch to the synchronized amp mode.
•When in the synchronized amp mode, you can adjust the receiver’s volume or mute the sound using the TV’s remote control.
•When in the synchronized amp mode, the synchronized amp mode is canceled when the receiver’s power is turned off. To turn the synchronized amp mode back on, set audio to be played through the receiver from the TV’s menu screen, etc. This receiver will power up and switch to the synchronized amp mode.
•When the synchronized amp mode is canceled, the receiver’s power turns off if you were viewing an HDMI input or a TV program on the TV.
•When in the synchronized amp mode, the
synchronized amp mode is canceled if an operation that produces sound from the TV is performed from the TV’s menu screen, etc.
•When the TV’s power is set to standby, the receiver’s power is also set to standby. (Only when the input for a component connected to the receiver by HDMI connection is selected or when watching the TV.)
•The receiver’s input switches automatically when the Control with
•The receiver’s input switches automatically when the TV’s channel is switched.
•The synchronized amp mode remains in effect even if the receiver’s input is switched to a component other than one connected by HDMI.
57
En