The System Setup and Other Setup menus | 11 |
Speaker system setting
• Default setting: Normal(SB/FH)
There are several ways you can use the speaker terminals with this receiver. In addition to a normal home theater setup where they are used for the front height speakers or front wide speakers, they can be used for
1Select ‘Speaker System’ from the Manual SP Setup menu.
See Making receiver settings from the System Setup menu on page 82 if you’re not already at this screen.
2Select the speaker system setting.
•Normal(SB/FH) – Select for normal home theater use with front height speakers in your main (speaker system A) setup.
•Normal(SB/FW) – Select for normal home theater use with front wide speakers in your main (speaker system A) setup.
•Speaker B – Select to use the B speaker terminals to listen to stereo playback in another room (see Switching the speaker terminals on page 62).
•Front
•ZONE 2 – Select to use the (surround back) B speaker terminals for an independent system in another zone (see Using the
3If you selected Normal(SB/FH), Normal(SB/FW), or Speaker B in Step 2, select the placement of the surround speakers.
In a
speakers placed directly at the sides of the listening
position, the surround sound of
that the surround sound is heard from diagonally to the rear as it should be.1
•ON SIDE – Select when the surround speakers is positioned right beside you.
•IN REAR – Select when the surround speaker is positioned obliquely behind you.
4When ‘Setting Change?’ is displayed, select Yes. If No is selected, the setting is not changed.
You will return to the Manual SP Setup menu.
Speaker Setting
Use this setting to specify your speaker configuration (size, number of speakers and crossover frequency)2. It is a good idea to make sure that the settings made in Automatically conducting optimum sound tuning (Auto MCACC) on page 37 are correct. Note that this setting applies to all MCACC presets, and cannot be set independently.
1Select ‘Speaker Setting’ from the Manual SP Setup menu.
2Choose the set of speakers that you want to set,
then select a speaker size.
Use / to select the size (and number) of each of the following speakers:3
•Front – Select LARGE if your front speakers
reproduce bass frequencies effectively, or if you didn’t connect a subwoofer. Select SMALL to send the bass frequencies to the subwoofer.
•Center – Select LARGE if your center speaker
reproduces bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect a center speaker, choose NO (the center channel is sent to the front speakers).
•FH – Select LARGE if your front height speakers reproduce bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect front height speakers, choose NO (the front height channel is sent to the front speakers).4
•FW – Select LARGE if your front wide speakers reproduce bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect front wide speakers, choose NO (the front wide channel is sent to the front speakers).5
Note
1Depending on the positions of the speakers and the sound source, in some cases it may not be possible to achieve good results. In this case, set the setting to ON SIDE or IN REAR.
2If you’re using a THX speaker setup, set all speakers to SMALL.
3If you select SMALL for the front speakers the subwoofer will automatically be fixed to YES. Also, the center, surround, surround back, front height and front wide speakers can’t be set to LARGE if the front speakers are set to SMALL. In this case, all bass frequencies are sent to the subwoofer.
4• You can adjust this setting only when Speaker System setting is Normal(SB/FH).
•If the surround speakers are set to NO, this setting will automatically be set to NO.
5• You can adjust this setting only when Speaker System setting is Normal(SB/FW).
•If the surround speakers are set to NO, this setting will automatically be set to NO.
83
En