Pioneer VSX-609RDS, VSX-709RDS

Connecting Your Equipment

7 To improve FM reception

Connect an external FM antenna. 7 To improve AM reception

Connect a 5 – 6 meter length of vinyl-coated wire to the AM

antenna terminal without disconnecting the supplied AM loop

antenna.

For the best possible reception, suspend horizontally outdoors.

Using external antennas

PAL connector

75 Ω coaxial cable

Outdoor antenna

Indoor antenna

(Vinyl-coated

wire) 5 – 6 m

Antennas

Hook up the supplied radio antennas as shown below.

Attach to a wall, etc. (if desired) and

face toward the direction providing

the best reception.

Assemble the antenna.

10mm

FM wire antenna

AM loop antenna

Connect the FM wire

antenna and fully extend

vertically along a window

frame, etc.

Twist exposed wire strands

together and insert into the

hole, then snap the connector

shut.

7 Speaker terminals

1Twist exposed wire

strands together.

2Loosen speaker

terminal and insert

exposed wire. 3Tighten terminal.

Use good quality speaker wire to

connect the speakers to the

receiver.

1Twist around 10 mm of bare

wire strands together.

2Unclip the speaker terminal

and insert the wire.

3Snap shut the speaker termi-

nal to secure.

ª

·

10 mm

VSX-709RDS only