Pioneer VSX-9100TX operating instructions Multi Room Setup, Volt Trigger Setup

Other Settings

Multi Room Setup

• Default setting: VARIABLE / Setting 1

If you’ve made multi-room connections (see Multi-room listening on page 58) you may need to specify your volume setting and IR receiver type.

1Select ‘Multi Room Setup’ from the Other Setup menu.

6.	Other Setup
[	a. DRC Setup	]
[	b. Dual Mono Setup	]
[	c . LFE ATT Setup	]
[	d. SR+ Setup	]
[	e . Multi Room Setup	]
[	f . 12V Trigger Setup	]

2 Select the volume level setting.

6e. Multi Room Setup			6f. Multi Room Setup
Volume Level			Volume Level
[	VARIABLE	]	[	FIXED	]
IR Setting			IR Setting
	[Setting 1]		[Setting 1]

11

Note

•Some IR receivers may not work with this receiver. Check with your audio dealer for more information.

12 Volt Trigger Setup

• Default setting: OFF (all components)

After connecting a component the 12 volt trigger (see Switching components on and off using the 12 volt trigger on page 62), it switches on automatically when you select an input function set to switch the trigger on. Specify which input functions switch on the trigger below.

1Select ‘12V Trigger Setup’ from the Other Setup menu.

6.	Other Setup
[		a. DRC Setup	]
[		b. Dual Mono Setup	]
[		c . LFE ATT Setup	]
[		d. SR+ Setup	]
[		e . Multi Room Setup	]
[		f . 12V Trigger Setup	]

CAUTION:If the "FIXED"	CAUTION:If the "FIXED"
position is chosen, the	position is chosen, the
volume will be loud.	volume will be loud.

•VARIABLE – Use this setting if you’ve connected a power amplifier in the sub room (this receiver is simply being used as a pre-amp) and you will be using this receiver’s controls to adjust the volume.

•FIXED – Use this setting if you’ve connected a fully integrated amplifier (such as another Pioneer VSX receiver) in the sub room and want to use that receiver’s volume controls.

Caution

•With the FIXED setting, the source is sent from this receiver at maximum volume, so make sure the volume is quite low in the sub room at first and then experiment to find the correct level.

3 Select the type of IR receiver you’re using.

6e. Multi Room Setup

Volume Level

[ VARIABLE ]

IR Setting

[ Setting 1 ]

•Setting 1 – Use this setting for most IR receivers.

•Setting 2 – Use this setting if the IR receiver you’re using doesn’t seem to work after selecting Setting 1.

4When you're finished, press RETURN. You will return to the Other Setup menu.

2Select an input function and choose the setting that you want.

This should be the input function, that when selected, switches on the 12 volt trigger.

6f. 12V Trigger Setup				6f. 12V Trigger Setup
DVD/LD	[		]	DVD/LD	[		]
		OFF				ON
TV/SAT	[	OFF	]	TV/SAT	[	OFF	]
DVR	[ OFF ]			DVR	[ OFF ]
VIDEO1	[ OFF ]			VIDEO1	[ OFF ]
VIDEO2	[ OFF ]			VIDEO2	[ OFF ]
TUNER	[ OFF ]			TUNER	[ OFF ]
CD-R	[ OFF ]			CD-R	[ OFF ]
CD	[ OFF ]			CD	[ OFF ]

•OFF – 12 volt trigger is not activated for the selected component.

•ON – 12 volt trigger is activated for the selected component.

3Repeat for as many input functions as you would like to set.

4When you're finished, press RETURN.

You will return to the Other Setup menu.

67

En