Additional information

Specifications

Amplifier section

Continuous average power output of 110 watts* per channel, min., at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.09%** total harmonic distortion (front).

Continuous Power Output

Front. . . . . . . . . . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%) Center . . . . . . . . . . . . . . . . . . . 110 W (20 Hz-20 kHz, 0.09%) Surround . . . . . . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%) Surround back . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%)

Audio Section

Input (Sensitivity/Impedance)

LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 mV/47 kΩ Frequency Response

LINE. . . . . . . . . . . . . . . . . . . . . .5 Hz to 100,000 Hz dB Output (Level/Impedance)

REC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 mV/2.2 kΩ Tone Control

BASS . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (100 Hz) TREBLE . . . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (10 kHz) LOUDNESS. . . . . . . . . . . . . . +4/+2 dB (100Hz/10 kHz)

(at volume position –40dB)

Signal-to-Noise Ratio (IHF, short circuited, A network) LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 dB

Signal-to-Noise Ratio [EIA, at 1W (1kHz)]

LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 dB

*Measured pursuant to the Federal Trade Commission’s Trade Regulation rule on Power Output Claims for Amplifiers

**Measured by Audio Spectrum Analyzer

12

Antenna Input . . . . . . . . . . . . . . . . . . . . . . 75 Ω unbalanced

AM Tuner Section

Frequency Range . . . . . . . . . . . . . . . . 530 kHz to 1,700 kHz Sensitivity (IHF, Loop antenna) . . . . . . . . . . . . . . . 350 µV/m Selectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 dB Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 50 dB Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loop antenna

Miscellaneous

Power Requirements. . . . . . . . . . . . . . . . . . .AC 120 V, 60 Hz Power Consumption . . . . . . . . . . . . . . . . . . . . 480 W, 630 VA In standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.43 W AC Outlet . . . . . . . . . . . . . . . . . . . . . (switched) 100 W MAX. Dimensions . . . . . . . . . . . . 420 (W) x 173 (H) x 465 (D) mm

(16 9/16 (W) x 6 13/16 (H) x 18 5/16 (D) in.) Weight (without package). . . . . . . . . . . . . . . . 15.4 kg (34 lb)

Furnished Parts

Microphone (for Auto MCACC setup) . . . . . . . . . . . . . . 1 Microphone stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 AA/LR6 dry cell batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FM wire antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 These operating instructions . . . . . . . . . . . . . . . . . . . . . . . . 1

Note

•Specifications and the design are subject to possible modifications without notice, due to improvements.

Composite Video / S-Video Section

Input (Sensitivity/Impedance) . . . . . . . . . . . . . . 1 Vp-p/75 Ω Output (Level/Impedance) . . . . . . . . . . . . . . . . . 1 Vp-p/75 Ω Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dB Frequency Response . . . . . . . . . . . . . 5 Hz to 10 MHz dB

Component Video Section

Input (Sensitivity/Impedance) . . . . . . . . . . . . . . 1 Vp-p/75 Ω Output (Level/Impedance) . . . . . . . . . . . . . . . . . 1 Vp-p/75 Ω Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dB Frequency Response . . . . . . . . . . . . . 5 Hz to 40 MHz dB

Cleaning the unit

•Use a polishing cloth or dry cloth to wipe off dust and dirt.

•When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleansers.

•Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surface.

FM Tuner Section

Frequency Range . . . . . . . . . . . . . . . . 87.5 MHz to 108 MHz Usable Sensitivity . . . . . . Mono: 13.2 dBf, IHF (1.3 µV/75 Ω) 50 dB Quieting Sensitivity . . . . . . . . . . . . . . Mono: 20.2 dBf Stereo: 38.6 dBf Signal-to-Noise Ratio . . . . . . . . . . . Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf)

Distortion . . . . . . . . . . . . . . . . . . . . . . . Stereo: 0.5% (1 kHz) Alternate Channel Selectivity . . . . . . . . . . . 60 dB (400 kHz) Stereo Separation . . . . . . . . . . . . . . . . . . . . . . 40 dB (1 kHz) Frequency Response . . . . . . . . . . . . 30 Hz to 15 kHz ± 1dB

77

En

Page 76 Page 78
Page 77
Image 77
Pioneer VSX-9100TX operating instructions Additional information Specifications, Cleaning the unit
Page 76 Page 78

VSX-9100TX specifications

The Pioneer VSX-9100TX is a powerful and versatile surround sound receiver that has garnered a strong reputation among audio enthusiasts since its release. Designed to cater to the needs of home theater aficionados, the VSX-9100TX comes packed with features and technologies that elevate the listening experience, making it a noteworthy addition to any audio setup.

One of the standout characteristics of the VSX-9100TX is its robust amplification capabilities. The receiver boasts a 7.1 channel output, delivering an impressive total power of 100 watts per channel. This means that users can experience rich, dynamic sound across multiple audio channels, making it an excellent choice for immersive movie watching or music listening.

Incorporating Dolby Digital EX and DTS-ES technologies, the VSX-9100TX ensures that users can revel in high-quality surround sound, regardless of the source material. This versatility allows for seamless playback of both stereo and multi-channel audio formats, allowing for an expansive soundstage that enhances the overall experience.

Another essential feature of the VSX-9100TX is its advanced room calibration technology. The built-in MCACC (Multi-Channel Acoustic Calibration System) optimizes sound output by analyzing the room's acoustics and adjusting the speaker settings accordingly. This results in a more balanced and natural sound that adapts to your specific environment, ensuring that every listener can enjoy optimal audio quality.

Connectivity options are plentiful with the VSX-9100TX, featuring multiple HDMI inputs, component video inputs, and analog audio inputs, making it highly adaptable to various media sources. Additionally, the receiver supports video upscaling, allowing users to enhance the quality of standard-definition sources to a higher resolution for improved viewing experiences.

The VSX-9100TX also includes a user-friendly interface, allowing easy navigation through its array of settings and features. The remote control provides intuitive access to various functions, making it convenient for users to switch between inputs, adjust volume, or engage different sound modes with ease.

In conclusion, the Pioneer VSX-9100TX stands out with its impressive amplification, cutting-edge audio technologies, and user-friendly features. Whether for movies, music, or gaming, this receiver is designed to deliver an exceptional audio experience, setting a standard that resonates with audiophiles and casual listeners alike. Its combination of power, versatility, and advanced sound calibration makes it a compelling choice for anyone looking to enhance their home theater system.
Top Page Image Contents