Pioneer VSX-D309 manual Preparing the Remote Control, Set up, Loading the batteries, 30 30 23ft 7m

Introductory Information

Preparing the Remote Control

Loading the batteries

Dry cell batteries (AA size IEC R6P × 2)

CAUTION!

Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions:

¦Never use new and old batteries together.

¦Insert the plus and minus sides of the batteries properly according to the marks in the battery case.

¦Batteries with the same shape may have different voltages. Do not use different batteries together.

Set up

Operating range of remote control unit

memo The remote control may not work properly if:

¦There are obstacles between the remote control and the receiver's remote sensor.

¦Direct sunlight or fluorescent light is shining onto the remote sensor.

¦The receiver is located near a device that is emitting infrared rays.

¦The receiver is operated simultaneously with another infrared remote control unit.

30

30

23ft (7m)

Operating other Pioneer components

By connecting a control cord (optional), you can
control other Pioneer equipment using this remote		CONTROL
control unit. Point the remote control unit towards		OUT
the remote sensor of this unit, even when operating
other equipment.
The remote control signals are received by the
remote sensor of this unit, and sent to the other
devices via the CONTROL OUT terminal.	VSX-D309

memo	You can also control Pioneer components
	by pointing the receiver's remote control
	directly at the component. This type of
	operation does not require control cords.
	Remote control unit

CONTROL

IN

OUT

Other Pioneer products with ë mark

Connect to CONTROL IN terminal of other Pioneer products with ë mark.

7