11Additional information
Proper installation and maintenance of this unit
Hints on installation
We want you to enjoy using this unit for years to come, so please bear in mind the following points when choosing a suitable location for it:
Do...
✓Use in a
✓Place on a solid, flat, level surface, such as a table, shelf or stereo rack.
Don’t...
✗Use in a place exposed to high tempera- tures or humidity, including near radiators and other
✗Place on a window sill or other place where the player will be exposed to direct sunlight.
✗Use in an excessively dusty or damp environment.
✗Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use.
✗Use near a television or monitor as you may experience
✗Use in a kitchen or other room where the player may be exposed to smoke or steam.
✗Use on a thick rug or carpet, or cover with
✗Place on an unstable surface, or one that is not large enough to support all four of the unit’s feet.
Cleaning the pickup lens
The DVD player’s lens should not become dirty in normal use, but if for some reason it should malfunction due to dust or dirt, consult your nearest Pioneer authorized service center. Although lens cleaners for CD players are commercially available, we do not recommend using them since some may damage the lens.
Problems with condensation
Condensation may form inside the player if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation won’t damage the player, it may temporarily impair its perform- ance. For this reason you should leave it to adjust to the warmer temperature for about an hour before switching on and using.
Moving the unit
If you need to move the unit, first press STANDBY/ON on the front panel to turn the player off. Wait for GOOD BYE to disappear from the display, then unplug the power cord. Never lift or move the unit during playback— discs rotate at a high speed and may be damaged.
•Unplugging the unit before GOOD BYE completely disappears from the display may cause the system to return to the factory settings.
60
En
