Setting up for surround sound

Dual mono setting

• Default setting: L-CH1R-CH 2

The dual mono setting can only be used when listening to Dolby Digital discs with dual mono encoding. These discs are not widely used, but are sometimes used to seperate the backing track from the vocals on karaoke discs. With this setting you can choose which channel in the dual mono setting you want to listen to.

You will hear the channel you have selected (either CH1 or CH2) through your center speaker. If surround sound is switched off, you will hear the channel you have selected through both front speakers. In the L-CH1 R- CH 2 setting, the left front speaker will play channel 1 and the right front speaker will play channel 2.

Use / to cycle through the possible dual mono settings.

L-CH1 R-CH2

CH2CH1

MONO MONO

LFE attenuator setting

• Default setting: 0 dB

Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers.

Use/ to set the attenuation level (0 dB, 10 dB or OFF).

Setting the relative volume level of each channel

Default setting (European model only):

RS/LS: +2dB

SW: +1dB

All other channels: 0dB

Default setting (all other models):

All channels: 0db

For best surround sound playback, you should set the relative channel levels from the main listening position. You can set seperate levels for each surround mode.

1Press SURROUND repeatedly to select a multi-channel listening mode.

The Surround mode can be set to anything but AUTO or STEREO.

2Press TEST TONE (SHIFT+4) to hear the test tone.

The test tone is output in the following order:

 

 

FL

 

 

C

 

 

 

FR

 

 

 

 

 

 

 

 

 

 

 

SW

 

 

 

LS

 

 

RS

 

 

 

 

 

 

 

3Press VOLUME +/– to adjust the volume to an appropriate level.

4Use the/ (cursor up/down) buttons to adjust the speaker levels in turn.

You should hear the test tone at the same volume from each speaker when seated in the main listening position. The channel level range is ± 10 dB.

5When you’re done, press TEST TONE (SHIFT+4) to turn off the test tone.

06

English

41

En

Page 41
Image 41
Pioneer S-DV303, XV-DV303 Setting the relative volume level of each channel, Dual mono setting, LFE attenuator setting