Pioneer S-DV505, XV-DV505 manual Ventilation, Before mounting

H040 En

VENTILATION:

European and Australian models:

When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 10 cm at top, 10 cm at rear, and 10 cm at each side).

All other models:

When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 20 cm at top, 15 cm at rear, and 15 cm at each side).

WARNING: Slot and openings in the

cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, to prevent fire hazard, the openings should never be blocked and covered with items, such as newspapers, table-cloths, curtains, etc. Also do not put the apparatus on the thick carpet, bed, sofa, or fabric having a thick pile.

Energy-saving design

This system is designed to use 0.5 W of electricity when power is switched to Standby.

CAUTION: THE STANDBY/ON BUTTON IS SECONDARY CONNECTED AND THEREFORE DOES NOT SEPARATE THE UNIT FROM MAINS POWER IN STANDBY POSITION. therefore install the unit suitable places easy to disconnect the MAINS plug in case of the accident. The MAINS plug of unit should be unplugged from the wall socket when left unused for a long period of time.

H017B_En

Operating Environment H045_En

Operating environment temperature and humidity:

+5ºC – +35ºC (+41ºF – +95ºF); less than 85%RH (cooling vents not blocked)

Do not install in the following locations

÷Location exposed to direct sunlight or strong

÷artificial light

÷Location exposed to high humidity, or poorly ventilated location

Wall mounting the speakers

Before mounting

• Remember that this speaker system is heavy and that its weight may cause the wood screw to work loose or the wall to fail to support it, in which case the speaker system may fall on the floor. This is extremely dangerous. Make absolutely sure that the wall is sturdy enough to support the weight of the speaker system. Do not mount it on plywood boards or soft-surface walls. The mounting screws are not included with this unit. Please find the correct screws for your application.

Wood screw

Protrude:5-7mm

	5 mm
5	10 mm
mm

Wall-mounting bracket

•If you are unsure of the quality and/or strength of the wall, consult a professional for advice.

•Pioneer is not responsible for any accidents or damage that result from improper installation.

3

En