FEATURE IDENTIFICATION
FRONT PANEL
BYPASS LIGHT
Lights when the optional RF Bypass Adapter module is switched to bypass mode. When in bypass mode, the Adapter sends cable signals directly to the TV.
CHANNEL AND VOLUME CONTROL/ CURSOR MOVEMENT KEYS
These keys have different functions, depending on what is displayed on the TV screen. During normal TV viewing, the 5/ ∇ (up/down) arrows change the channel by stepping up or down one channel at a time. The 2/3 (left/right) arrows adjust the sound level up or down.
When a menu is displayed, these same keys move the cursor up or down, left or right.
CHANNEL NUMBER/TIME DISPLAY
Shows channel number or current time. Also shows “rEC” when recording is taking place.
When a menu is displayed, returns you to normal TV viewing. May also have special functions as described in the
MESSAGE LIGHT
Blinks when the
POWER BUTTON
Turns on the
POWER ON INDICATOR LIGHT
Lights to show the
REMOTE SENSOR WINDOW
Receives signals from the remote control.
IMPORTANT:
Do not block this window.
SELECT KEY
Selects the desired action highlighted on the screen.
SMARTCARD SLOT
Accepts a special card provided by your cable company. This card is not always needed for
REAR PANEL
AC POWER INLET
Connects to an unswitched
AC POWER OUTLET
Provides AC power to the connected TV.
CAUTION:
Connect only the TV AC power cord to this outlet.
This outlet allows 400 watts maximum power consumption. To prevent the risk of fire or damage to the Home Terminal, do not connect any kind of equipment of more than 400 watts power use, or any other equipment (toaster, hair dryer, etc.).
BASEBAND AUDIO OUTPUT CONNECTORS
Connects to the stereo (L and R) audio inputs of a VCR, audio amplifier, or TV. Requires audio cables with male phono (RCA) plugs (not included).
BASEBAND
Connects to the
BASEBAND VIDEO OUTPUT CONNECTOR
Connects to the standard baseband video input of a VCR or TV. Requires video cables with male phono (RCA) plugs (not included).
CABLE IN INPUT CONNECTOR
Connects to the incoming cable service. Requires
DIGITAL AUDIO OUTPUT CONNECTOR
Connects to the digital audio input on your stereo amplifier, receiver or digital audio decoder.
ETHERNET CONNECTOR
Connects to a
SERIAL PORT CONNECTOR
Connects to the optional VCR Commander. The VCR Commander controls recording of programs on your VCR through the
TO TV OUTPUT CONNECTOR
Connects to the TV’s VHF antenna input. Requires
USB CONNECTOR
Connects to USB (Universal Serial Bus)- equipped options such as a wireless keyboard infrared receiver.
5
<BRB1050>