Pitco Frialator PPE14-L, and RSE14 manual 1.3.3Electrical Connection

1.3.3Electrical Connection

WARNING

The cooker must be electrically grounded in accordance with local codes. If local codes do not apply, follow the requirements of National Code ANSI/ NFPA 70-1990.

The electrical service used by the cooker must comply with local codes. If there are no local codes that apply, refer to the National Electrical Code (NEC) to install the service. In Canada, refer to CSA Standard C22.1, Canadian Electrical Code, Parts 1 and 2, and/or local codes. The power require- ments for the cooker are shown on the next page.

The cooker is shipped with internal wiring configured to support the voltage and phase requirements ordered. The wiring configuration can be verified by comparing the schematic supplied with the cooker to the wiring arrangement in the cooker. Table 1-1 provides a list of cooker models and voltages available and includes the heating element part number for the specified voltage. Check the cooker data plate to ensure the cooker to be installed matches the power to be supplied to it.

CAUTION

Connecting the cooker to the wrong facility power supply may damage the cooker and void the warranty.

Keep the POWER switch OFF until the cooker is ready for use.

It is essential that the cooker be provided with a 2 wire, neutral and ground.

1-4