B700 Installation Instructions
h.Data Center: “The setting/combination number is __________.”
i.Data Center: “Please enter request code.”
Write this number in the space provided on your refill report.
At the telephone press 7 followed by the
*(asterisk) to hear the setting/combina- tion number again.
j.Data Center: “Setting number is:______
__________.”
k. Data Center: “Please enter request code.”
Completing the Refill at Your Meter
a. The meter prompts: “Enter Combo.”
Make sure the setting/combo number you wrote in step h is correct.
Press 4 and * to end the call.
b.Use the meter's number keys to type the setting/combination number the Data Center gave you in step h above. Press Enter.
c.If the refill is successful, the display briefly shows “Refill OK” and then “$Avail= XXX.XX” where XXX.XX is the postage amount now available. (If the refill amount you asked for was $50.00 or less, the meter displays “Low Funds.” This is normal. As delivered, your meter is set to show this warning when the postage available reaches or falls below $50.00.)
d.If the refill was not successful, the display will show “Failed” for two seconds and then “Insuf Funds.” If this happens, or should you have other problems with your meter after following the steps in this installation guide, please call:
Direct Distribution Assistance 
The Direct Distribution Help Line is available Monday through Friday between the hours of 8:00 A.M. and 8:00 P.M., Eastern Standard Time.
Congratulations! Your meter is now installed, filled with post- age and ready to go to work for you. The instructions on the next two pages tell you how to process mail. If your meter is equipped with the optional Electronic Interface (DataLink) fea- ture, follow the setup and operating instructions furnished with it. See page 11 of this booklet.
Page 7
