Clear Jam / Moistener
Rate Preview
Clear a Jam
To clear a jam, do the following:
1 | Turn the jam clearance lever to the |
| right (clockwise). |
2 | Remove the mail piece. |
Using the Moistener
3 | Rotate lever back to its home |
| position. |
You may moisten, seal, and print postage in one smooth operation.
1 | 2 | 3 |
Install moistener as shown. | Fill reservoir with | Guide envelope flap around gray edge |
| Sealing Solution. | of moistener deck as shown. |
5 If these values are acceptable, select YES: store preset.
Are all the curernt values correct?
YES: store preset NO:review values
6 | Return to the Home Screen by |
| selecting Home or Clear. |
From this point on whenever you
select the Normal Preset key the values you just chose will be set on your meter.
Custom Preset
Normal Preset Home
Setting the Normal Preset to a Class
If you define a preset based on a Postal Class (e.g. First Class Letter) instead of only a value (e.g. $0.42) your preset will update automati- cally whenever the postal rates change. This is highly recommended.
1 Select Class.
Set up a class of mail (for example, select 1st Class followed by Letter, followed by Done).
Confirm that the screen now shows the correct class (in this
example, it should read “Class: 1st ClLtr” and “0.42”).
Aug 24 08 |
| 0.42 |
|
CLASS 1st ClLtr
SCALE 0lb 0.0 oz
2 | Set up a preset. |
| Press the Custom Presets key. |
| Select Define Normal Preset. |
| Select YES: store preset. |
3 | Complete the process. |
| When the system returns to the “Custom Presets” screen, |
press the Home key.
Normal Preset - Value
Normal Preset - Class