6 • System Options

Changes to the Lock Code and Password

Setting the Lock Code

The Lock Code prevents unauthorised access to your mailing system after the machine has entered sleep mode or it is in a "soft" power- down mode (by pressing the Lock/Power key on upper right corner of the control panel).

1.Press Options.

2.Select "Setup".

3.Select "LockCode/Password".

4.Select "Enable Lock Code".

5.At the prompt, type in a new lock code (4 digits) and select "OK".

6.Re-enter the new lock code again to confirm and select "OK".

7.At the "Lock Code enabled" message, select "OK".

8.Press Home to return to home menu.

Disabling the Lock Code

1.Press Options.

2.Select "Setup".

3.Select "LockCode/Password".

4.Select "Disable Lock Code".

5.When prompted, enter the current Lock Code and select “OK”.

6.Press Home to return to the home menu.

IMPORTANT INFORMATION

Your DM300c/DM400c mailing machine contains postal funds and if you opt to use the 4-digit Lock Code to secure the funds, it is important that you do not allow your Lock Code to be compromised if the machine is used in an open area. If you believe your Lock Code has been compromised, it should be changed immediately. Alternatively, you may wish to consider locking the machine in a secure area.

SDC755A

6-9