6 • System Options
Changing the Lock Code
You can change the Lock Code if it has been enabled.
1.Press Options.
2.Select "Setup".
3.Select "LockCode/Password".
4.Select "Change Lock Code".
5.At the prompt, type in the current lock code (4 digits) and select "OK".
6.At the prompt, type in a new lock code (4 digits) and select "OK".
7.
8.At the "Lock Code enabled" message, select "OK".
9.Press Home to return to home screen.
Setting/Disabling the Supervisor Password
The supervisor password prevents access to sensitive setup procedures.
1.Press Options.
2.Select "Setup".
3.Select "LockCode/Password".
4.Select either "Enable Password", “Disable Password” or “Change Password” as required.
5.If there is an existing Supervisor Password, you are prompted to key in the
NOTE: If you have disabled the password, the machine will confirm that it has been turned off. Press “OK”.
6.If you are creating or changing the password, key in the new 4- digit code that you require.
7.Select “OK”.
8.Enter the new code again to confirm, then press “OK”. The machine will confirm that the new password has been enabled.
9.At the "Password Enabled" message, select "OK".
10.Press Home to return to the home screen.
SDC755A |