7 • Maintenance
Maintaining the Moistener (DM300c Only)
If you notice incomplete or poor sealing and the moistener tank is full, you may need to clean the moistener brush or wick. If seal quality doesn't improve after cleaning, you can replace the moistener brush or wick as needed. See Chapter 9, Supplies and Options for instructions on ordering these supplies for your machine.
Removing the Moistener
1. Push down on the blue release lever on the moistener.
2. Pull the moistener straight out to the left.
Removing the Moistener Brush
Release
Lever
1. Remove the moistener as
Brush Holder
described above.
2. Open the hinged brush holder. Brush
3. Grasp the bristles and slide the brush out of the hinged brush holder, towards the front of the moistener tank.
SDC755A |