Installation Instructions
11.Enter your scale location code
Note: Your scale will not work unless you perform this step.
a.Find the location code corresponding to your location on the map.
b.Enter the code via the numeric keys.
c.Ensure that the code on the display matches your location code.
d.Press Enter.
N421
install
12.The scale is now ‘ready’
Select Select Select
Category Zone Fees
After entry of the location code, the scale goes through a short test sequence, then displays 0000g and the Select Category arrow flashes. This is the ready mode.
If your postage meter has an optional Datalink unit fitted, configure it now as described in the Datalink Operating Guide.
Zone | Piece | Error |
| Count |
|
Scale ready mode
Congratulations!
You have successfully installed your Pitney Bowes Scale.
For information on using the scale, refer to the Operating Guide.
If you have existing Pitney Bowes equipment that needs to be returned, follow the
instructions included in your ‘Information Pack’ now.
Page 5