Installation Instructions
N421
install
4. Install the Rate PROM 5. Locate the plug ports
If you have been supplied with a PROM, slide it into its slot ensuring the opening in the PROM handle is in the top right corner. Press it firmly until it snaps into place. Refit platform.
If a rate PROM has not been supplied, you can omit this stage.
Locate the plug ports under the front of the scale and plug in the small end of the power cable.
6. Connect the | 7. Tuck the cable(s) into | ||
postage meter cable | the cable guides | ||
If using a Postage Meter, plug the | Tuck the cable(s) under the guides on | ||
small end of the meter cable into the | the bottom of the scale. | ||
scale. | Turn the scale back onto its feet. | ||
|
|
|
|
|
|
|
|
Page 3