FILM & 2:2 PULLDOWN indicator LEDs
PASSTHRU indicator LED
LCD Display
The LCD display has 2 distinct modes see Section 6for further details:
Status Display
By default, the LCD displays the current status of Crystalio II,
which includes the following information:
• Input source format
• Image aspect ratio
• Overscan
• Gamma type
• Primary output port
• Output resolution
• Deinterlacing mode
Setup Display
When you are setting up Crystalio II, the LCD display shows the setup menu. Typical operation
includes:
• To enter menu set up mode, press [OK]
• To highlight the previous or next item, press [UP]or [DOWN]
• To increase or decrease value, press [LEFT]or [RIGHT]
• To select an item or confirm setting, press [OK]
• To exit and go up one level of the menu, press [BACK]
Infra Red (IR) input sensor
Film 2:2 Pulldown Mode
OFF OFF Video (Motion Adaptive Deinterlacing)
ON OFF Film (3:2 Pulldown)
ON ON Film (2:2 Pulldown)
OFF ON Not applicable
8
9
10
11
12