• Audio Output:
• You can also define any audio output port as the output of sub-picture audio. In this
case, the audio output port(s) is switched to output audio from the “audio source of sub-
picture” rather than audio from the “audio source of normal processing”
• The audio output from the sub-picture audio source has no delay
• This feature is available only in firmware version 2.00 or later
• PIP/PBP and Secondary Passthru share the video input source. Therefore, when you set
PIP/PBP to ON, it is better to turn Secondary Passthru to OFF. Otherwise the video input
source of Secondary Passthru will be taken over by PIP/PBP as the video input source of
the sub-picture
When the action button is pressed, the OSD turns to the following page:
• Use the Left/Right arrow remote control keys to adjust the sliders
• Use the Up/Down arrow remote control keys to select between different sub-picture
adjustment options
• When OK is pressed on the remote control, the whole OSD is hidden and only the slider
control is shown at the lower left corner of the display
• Pressing Back on the remote control will return you to the full OSD, or simply press the
Menu key to exit from OSD mode
• You can select a different color as the frame of the main picture and/or sub-picture. The
default is no frame
75