Pixel Magic Systems VPS3800 manual Picture in PICTURE/PICTURE by Picture, Video Input

7.10PICTURE IN PICTURE/PICTURE BY PICTURE

•When Crystalio II is in “Picture In Picture” (PIP) mode, there is a small sub-picture on top of the main picture, which comes from another video input source. In PIP mode, you can:

•Adjust the position of the sub-picture

•Adjust the size of the sub-picture

•Adjust the transparency of the sub-picture

•Crop the 4 sides of the sub-picture

•When Crystalio II is in “Picture By Picture” (PBP) mode, main picture is shifted to one side and a sub-picture, which comes from another video input source, appears in the other side (they are side by side). In PBP mode, you can:

•Adjust the position of the line splitting the main picture and sub-picture

•Adjust the position of the sub-picture

•Adjust the size of the sub-picture

•Crop the 4 sides of the sub-picture

•You can choose to have a frame on the sub-picture and/or main picture

•Main picture and sub-picture can be swapped

•When main picture is in passthru mode, PBP mode will be ignored

•Video Input:

•You can select any of the video input sources as the sub-picture, but with the following exceptions:

When video source	Video source of
of main picture is	sub-picture can not be
HDMI 1	HDMI 2
HDMI 2	HDMI 1
HDMI 3	HDMI 4
HDMI 4	HDMI 3
Component 1	Component 2
Component 3	Component 4

•Audio Input:

•The audio mapped to the video source of sub-picture is the same as defined in Audio Input Select (see Section 5.4.1). However, in a simlar way to video input, there are exceptions:

When audio input of	Audio input of
main picture is	sub-picture can not be
HDMI 1	HDMI 2
HDMI 2	HDMI 1
HDMI 3	HDMI 4
HDMI 4	HDMI 3
Analog audio 1	Analog audio 2, nor Analog audio 3
Analog audio 2	Analog audio 1, nor Analog audio 3
Analog audio 3	Analog audio 1, nor Analog audio 2

74