Planar A480-PL user manual Viper PD7170 Attachment Security Hook

VIPER (PD7170) ATTACHMENT SECURITY HOOK

ATTACHMENT

(Phillips screwdrivers, pliers, scissors and appropriate ceiling hooks required)

Plate Hook Bag Contents (AK6 only)

#8-32 Wire Hook (2)

#8-32 Nut (4)Ceiling

#8 Washer (4)

side

		M4 Lock Washer (2)
3/16” Chain (6 feet)	Chain End (4)		Plate Hook
			as assembled to

Attachment Plate

1.Install the Plate Hook Assemblies in the two “H” holes of the Attachment Plate (see diagram) with the hook ends on the ceiling side as shown above. Use pliers to bend the closed hooks apart just enough to install a Chain End at a later time.

Attachment

Screws

Spacers

Ceiling Mount

adapter

Attachment

Plate

2. Install ceiling hooks (not supplied) into the ceiling directly above the Plate Hooks. The ceiling hooks should be small enough to accept a Chain End

but strong enough when installed to each support 40 pounds or more.

5.Attach a Chain End to the Chain and then connect to one of the ceiling hooks. Cut the Chain and assemble to another Chain End for a best fit to the corresponding Plate Hook and attach. Repeat for the other set of hooks.

Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc.

Page 12