Planar EP4650, EP5550 manual Dvi

OSD Menu Functions

Main Menu	Submenu	Secondary	Description	Setting
		Menu
Advanced	Smart light control		Select the Backlight control	Off, DCR, Light Sensor
Settings			function DCR (Dynamic contrast) –
			from the input source
			Light Sensor – from ambient light
	Wake Up From Sleep		Energy-saving function	Never Sleep
				VGA Only
				VGA, Digital, RS232
	Ethernet	Enable	Enable the network feature	Yes, No
	Setup	Network
		Dynamic IP	Enable the Dynamic IP mode	Disable, Enable
		Static IP	Set the static IP address	255.255.255.255 (0.0.0.0)
		Address
		Subnet Mask	Set the subnet mask	255.255.255.255 (0.0.0.0)
		Gateway	Set the gateway address	255.255.255.255 (0.0.0.0)
		DNS Address	Set the DNS address	255.255.255.255 (0.0.0.0)
		Save Network	Update the IP settings to the net	Yes, No
		Settings	device
		Load Default	Load the default network settings	Yes, No
		Settings
		Device MAC	Show the unique address assigned
			to network interfaces
	Multi-Display	Monitor ID	Manually select the Monitor ID of	1~25
	Control		each display
		Video Wall	Disable/Enable Video Wall	Yes, No
		DVI	Used for large video walls that have	Off, On
		Indemnity	a single digital source and DVI pass-
			thru cables. Turning on DVI
			Indemnity may enhance the video
			quality and reliability of pass-thru
			signals.
		Power On	Select the Power On delay in	0~1.50 (in .05 second
		Delay	seconds for each display in the	increments)
			video wall
		Frame	Disable/Enable Frame	Yes, No
			compensation
		Matrix X	Sets the number of displays used in	1~5
			the horizontal position

34 EP4650/EP5550 User Manual