Normal Usage Guidelines

Normal Usage Guidelines

Normal use of the LCD is defined as operating in the open air to prevent heat buildup, and without direct or indirect heat sources such as lighting fixtures, heating ducts, or direct sunlight that can cause the modules to experience high operating temperatures. For all modules, do not block fans or ventilation openings. If the LCD module will be installed in a recessed area with an LCD surround or enclosure, ensure adequate openings are applied for proper air flow and ventilation.

At 3000 meters or below, the maximum ambient operating temperature for the LCD module cannot be above 40º C nor below the minimum ambient operating temperature of 0º C. If one of these conditions exists, it is up to the installer to ensure that module placement is changed, thermal shielding is provided and/or additional ventilation is provided to keep the display within its nominal operating parameters.

Cooling Requirements

For optimal performance, active cooling by the installer should be planned for when the ambient temperature at the top of the wall is predicted to be above the specified ambient temperature for the panel. Cooling may be done behind the displays and depending on the wall configuration, it may be helpful to place air ducts (AC) at every third display tall.

VESA Mounts, General Description

VESA mounts are used to secure the Planar EP-Series for display. The display can be installed using a variety of VESA mounts available through Planar. If you do not have a VESA mount and would like to purchase one, contact Planar.

If you purchased a VESA mount, you should have a received a separate box with mounting supplies and an Installation manual. Follow these instructions carefully.

Keep in mind the following general installation guidelines:

•Screw length is crucial and will vary depending on the type of mount you use. Total screw length will include the penetration length plus the length required by the type of VESA mount in use.

•Mount spacers may be required to accommodate the protruding back panel of the OPS slot.

Caution: Shorter screws will result in insufficient mounting strength and longer screws could puncture parts inside the display.

•Prior to installation, make sure you know where all of the mounting points are located.

•Follow all safety precautions outlined in the VESA Installation manual.

•Verify the parts received with the list shown in the VESA Installation manual.

6

EP5804K, EP5804K-T, EP6504K and EP6504K-T User Manual

Page 11 Page 13
Page 12
Image 12
Planar EP6504K/EP6504K-T manual Vesa Mounts, General Description, Normal Usage Guidelines, Cooling Requirements
Page 11 Page 13

EP6504K/EP6504K-T, EP5804K/EP5804K-T specifications

The Planar EP5804K/EP5804K-T and EP6504K/EP6504K-T represent the forefront of digital signage technology, embodying cutting-edge features and exceptional display characteristics ideal for various professional environments. These 4K Ultra HD displays are designed to deliver stunning visual clarity, making them perfect for retail, corporate, and broadcasting applications.

One of the most significant features of the EP5804K and EP6504K series is their superior resolution of 3840 x 2160 pixels. This level of detail ensures that images are sharp and vibrant, capturing the attention of viewers and enhancing engagement. The displays support a wide color gamut, allowing for more accurate and vibrant colors, which is crucial for presentations that rely on visual data and imagery.

In terms of technology, both models utilize advanced LED backlighting, which results in improved brightness and contrast ratios. This technology ensures that the displays are visually striking, even in brightly lit environments. Additionally, the EP5804K-T and EP6504K-T versions come equipped with touchscreen capabilities, allowing for interactive applications. This improves user engagement, making it easier to navigate content and access information.

Another remarkable characteristic is the robust build quality of these displays. Designed for continuous operation, they can handle extended hours of use without overheating, making them reliable for public display settings. The integration of built-in cooling solutions helps maintain optimal performance levels.

Connectivity options are also a strong point. Both the EP5804K and EP6504K series feature a variety of ports, including HDMI, DisplayPort, and USB, facilitating easy integration with existing systems. The versatility of these displays allows them to be used in a multitude of configurations, whether as standalone units or as part of a larger video wall setup.

Furthermore, the Planar EP5804K and EP6504K series come with a user-friendly interface for easy setup and management. Administrators can quickly configure display settings and control content through intuitive menus. With features such as remote management, users can easily monitor and adjust display settings from a distance, ensuring seamless operation.

In summary, the Planar EP5804K/EP5804K-T and EP6504K/EP6504K-T displays are exceptional choices for anyone seeking high-quality 4K digital signage solutions. Their superior resolution, vibrant color accuracy, durable design, and extensive connectivity options, coupled with interactive features in touchscreen models, make them stand out in a competitive landscape. These displays are indeed a worthwhile investment for businesses looking to elevate their visual communication strategies.
Top Page Image Contents