16
As with any OSD setting, a change to the minimum brightness limit will be permanently stored and will be unaffected by turning off the monitor power.
The minimum brightness limit will affect the minimum brightness of both the automatic brightness control mode and the manual brightness control mode identically. Below is a graph showing the impact of various minimum brightness limit settings on the automatic brightness control mode.
Maximum Brightness Mode
If a constant maximum brightness is desired, simply connect both the DIM_INPUT and the /EXT_DIM inputs of connector J1 to ground. The monitor will then be set to the maximum brightness.
Alternatively, one may avoid the need to connect to the dimming connector by using the OSD to set the minimum brightness limit to the maximum value of 62. This will set the minimum brightness to typically 900 cd/m2, which is very close to the maximum brightness. The resulting monitor brightness range of approximately 900 to 1050 cd/m2 will yield brightness changes largely undetectable by the end user.
