26
Going to Sleep
This message means the LCD display is under the power saving mode. In addition, the LCD display will go to this sleeping mode when experiencing a sudden signal disconnecting problem.
Unsupport Mode
This message means the signal of the computer graphic card is not compatible with the LCD display. When the signal is not included in the compatibility mode we have listed in the Appendices of this manual, the LCD display will appear this message.
Out of Range
This typically means the refresh rate or resolution is set too high. Set the resolution to 1024 x 768 and set the refresh rate to 75 Hz or lower. On a PC, these adjustments are typically made using "Display Properties" in the Control Panel folder.
Faint Horizontal Dark Lines Across the Screen
This display is directly backlit by cold cathode fluorescent lamps. Slight brightness nonuniformity is normal.
Mechanical Outline
See mechanical outline drawing on www.planar.com/support
