Note: If needed, connect an audio cable to the audio port on the monitor, and to the headphone or audio line output connector on the computer.
If an external keyboard or other USB device will be used with the monitor, plug it into either of the monitor’s Type A USB connectors.
Two USB devices can be connected to the monitor.
The following figure shows typical connections.
Keyboard
(optional)
USB
VGA
Remote PC Shutdown
Audio
Computer
12V
Power Source
5.Turn on power to the computer. The monitor then turns on as soon as it receives a video signal from the computer, and its LED turns green.
Also, the first time the monitor is powered up, it automatically displays a test pattern of repeating colored screens (black, white, red, green, and blue) until a video signal is detected.
6.Install the monitor’s driver software and configure the monitor’s touch screen as needed.
Note: For best results, adjust the display mode of the computer to a resolution of 1024 x 768 and a refresh rate of 60 Hz.
