Planar PL1520M manual Cable Connections, Installation Instructions

INSTALLATION INSTRUCTIONS

CABLE CONNECTIONS

·Connecting the Signal Cable: Plug one end of the VGA Cable to the LCD monitor’s “ VGA” input socket , the other end to the computer's VGA port and tighten the two screws on the cable connector.

·Connecting the Power Cord: Plug one end of the AC-power cord to the LCD monitor’s AC input socket , the other end to a wall outlet.

·Connecting the Audio Cable: Plug the audio cable between the computer multi-media (or sound) card's audio output and the monitor's audio input (located on the back of the monitor).

·Connecting the S-Video Cable: Plug one end of the S-video cable (not included) to the LCD monitor’s S-Video port and the other end to a video source output.(eg. DVD player, video recorder, a film camara with S-Video connection or a PC)

·Connecting the Video Cable: Plug one end of the composite video cable to the LCD monitor’s composite video port and the other end to a video source .(eg. DVD player, video recorder, a film camara with video port or gaming console)

Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied).

Figure 2 Connecting the Cables

①: Compsite Video Port

②: S-Video Port

③: VGA port

④: Audio port

⑤: AC Power input port

8