Planar PL1520M manual VGA Picture Setting, OPERATING INSTRUCTIONS cont, ·Brightness, ·Contrast

OPERATING INSTRUCTIONS (cont.)

VGA Picture Setting

When the input source is in VGA (PC) mode, you can select Brightness, Contrast, H/V Position, Clock, Phase, AUTO, Color, and Reset as shown in the figure below:

VGA Picture Setting

1.Press “ MENU” key to open OSD menu

2.Press>or <key to select “VGA” Picture Set up option

3.Press “MENU” key to Select submenu

·Brightness

1.Press>or <key to select “Brightness” option

2.Press “MENU” key to Select submenu

3.Press>or <key to adjust brightness value.

4.After adjustment, press “AUTO” key to exit.

·Contrast

1.Press>or <key to select “Contrast” option

2.Press “MENU” key to Select submenu

3.Press>or <key to adjust contrast value.

4.After adjustment, press “AUTO” key to exit.

·H-position

1.Press>or <key to select “H-position” option

2.Press “MENU” key to Select submenu

3.Press>or <key to adjust H-position data.

4.After adjustment, press “AUTO” key to exit.

17