Xerox 550 Working with near-linefinishers, Near-linefinisher overview, Saving the tab settings

Saving the tab settings 79

Saving the tab settings

Requirements:

You have created tabs in a PDF or PostScript file.

After creating tabs in your file, you can save the tab text attribute settings and the tab locations and captions (text on the tab).

1.In the upper part of the Tabs Printing window, click Save.

2.In the Setting Name box, type a name for the tab settings.

3.Select the Include tabs location and caption check box to save the locations and text of the tabs that you created.

4.Click Save.

The setting is saved in the Saved Settings list.

Note: You can apply this saved setting to your file by selected this from the

Saved Settings list, and then click Apply.

Deleting saved tab settings

1.In the Storage area, right-click your unprocessed job, and select Job Preview & Editor.

The job opens in Acrobat software.

2.From the Plug-Insmenu, select Tabs Printing.

The Tabs Printing window opens, displaying the Text Attributes tab.

3.From the Saved Settings list, select the desired saved settings.

4.Click Delete.

Working with near-line finishers

Near-line finisher overview

The CX print server supports two near-line finishers, Duplo DC-645 and DSF-2000. Using the CX print server, you can perform the following actions:

●Generate and print barcodes and registration marks for the Duplo DC-645 finisher. The barcode and registration marks are generated according to the job details that were programmed on the finisher.

●Generate and print barcodes and corner marks for the DSF-2000 finisher. The barcode and corner marks are printed on every page and are automatically created based on the following settings in your job: