Sharp FO-5550, FO-5700, FO-4700 operation manual 1 9 9, Setting the Date and Time

Setting the Date and Time

Setting the Date and Time

The date and time appear in the display, in reports, and at the top of each page you transmit. Set the date and time by pressing the keys on the operation panel as shown below.

Note: Make sure the display shows the date and time before beginning a programming operation. If the display shows the telephone line status, press the CHANGEOVER key to switch to the date and time.

1 Press these keys:

The display will show:

4:DATE&TIME SET MODE DATE 06-08-1999

FUNCTION

3 4

(Note: the currently set date will appear to the right of “DATE”)

2 Enter a two-digit number for the month (“01” for January, “02” for February, “12” for December, etc.).

∙To correct a mistake, press the STOP key to move the cursor back to the mistake and then enter the correct number.

01

Example: January

3 Enter a two-digit number for the day	0	5
(“01” to “31”).

4 Enter the year (four digits).

Example: the 5th

1 9 9 9

Example: 1999

30