Sharp FO-5700, FO-4700 Setting 17 RETRANSMISSION TIMES, Setting 18 RETRANSMISSION INTERVAL

Optional Settings

Note for FO-4700: This setting will only appear if your dealer has installed the paper cassette option and Option Setting 33 (Seperate Mode) is turned off.

Note for FO-5550/FO-5700:This setting will not appear if Option Setting 33 (Separate Mode) is turned on.

♦Initial setting: 1

Setting 17: RETRANSMISSION TIMES

This sets the number of times the fax will reattempt a memory transmission which has been interrupted by a line error or power failure. Enter any 2-digit number from 01 to 14, or enter 00 to turn off the function.

♦Initial setting: 10

Setting 18: RETRANSMISSION INTERVAL

You can select the number of minutes the fax waits between each memory retransmission attempt. Enter 01 for 1 minute, 02 for 2 minutes, etc., up to a maximum of 15 minutes. If you do not want the fax to wait between attempts, enter 00.

♦Initial setting: 02

Setting 19: HEATER MODE

To conserve power, you can turn off the laser printer heater in your fax machine. When this is done, the heater will turn on automatically when you receive a document (there will be a slight delay before printing while it warms up) and turn off when printing is completed. Press 2 to turn off the heater, or 1 to keep it on.

♦Initial setting: 2

Setting 20: ANTI-JUNK FAX

Press 1 to block reception from fax numbers entered in the Anti Junk Fax List. Press 2 to allow reception from all numbers.

♦Initial setting: 2

148